RMC10 Small Format Robotic Milling Systems

RMC10 Data Sheet 2023

Cell Dimensions

SAEMetric
Length84"2,134 mm
Width60"1,524 mm
Height (no riser)84"2,134 mm

Working Envelope

SAEMetric
Max part diameter (rotary)48"1,219 mm
Max part height (rotary)48"1,219 mm

Approved Materials

  • Foam, Clay, Ice
  • Sand, Plastic, Wax
  • Soft wood (some), Composite, Ceramic
  • Plaster, Cork

Cutting Speeds and Feeds

Speeds and feeds vary by material, depth, step-over, tooling, finish quality, and more. Values below assume lightweight foam at ½” LOC cut depth.

SAEMetric
Roughing600 in/min15,000 mm/min
Finishing200 in/min5,000 mm/min

Robot Arm

SAEMetric
Number of axes6 (arm) + 1 (rotary)
Max payload22 lbs10 kg
Max reach43"1,100 mm
Repeatability± 0.002"± 0.05 mm
Protection ratingIP 64
Ambient temperature50 – 130 °F10 – 40 °C
Sound level< 75 dB

Spindle

SAEMetric
Horsepower5 HP
Max RPM24,000
CoolingElectric fan
TaperISO 20
ColletER 16
Max collet size1/2"12 mm
Max tool weight5 lbs2 kg

Tool Garage

Standard configuration holds 5 tools. Custom setups available upon request.

SAEMetric
Capacity5
Max tool diameter (full)2"50 mm

Tool Setter

SAEMetric
Repeatability0.002"0.05 mm

Requirements

SAEMetric
Power240 VAC, 1- or 3-phase, 30A
Air6 SCFM, 80 PSI
Recommended floor thickness6" (not required)152 mm
RMC10-Robotic-Milling-System

This system comes standard with:

  • Live Rotary Table

  • 4’ tall 5” Diameter Reach

  • 5-station “Tool Garage”

  • 14,000 RPM Spindle

Simple electrical requirements, a standard double-doorway, and our step-by-step instructions are all that’s needed to setup and run.

This system is ideal for machining:

  • Foam

  • Ice

  • Plastic

  • Clay

  • Wax

  • Composite

  • Soft Wood

  • Plaster

RMC10-Robotic-Milling-System